Why Hardox?

Hardox® 500 is bendable, weldable highly abrasion resistant steel with a nominal hardness of 500 HBW. In our view this makes it an ideal material for shooting targets.
There is a significant difference between Hardox ® 500 hardened steel targets and mild steel targets. We carried out our own testing. 

Targets:
Orange - Hardox® 500 10mm Plate
Blue - Mild Steel 10mm Steel Plate
Distance: 100 metres
Ammunition: 6.5 x 55, 140 grain.
Energy: 2550 fps

The results (see pictures above)

The Hardox® 500 plate was not penetrated. The bullet made a minor indentation to the plate surface,the orange powder coating was vaporized by the bullet splattering on the plate surface. The integrity of the plate remained relatively unchanged.

The mild steel plate was extensively penetrated almost completely by the bullet leaving sharp swarf on perimeter of penetration.

Conclusion:
The mild steel target would soon fail after repeated use
The Hardox® target will remain easy to paint and reusable with an increased service life over mild steel

Toms-Targets only use certified Hardox® 500 Steel plate to manufacture its extensive range of shooting targets.
The crucial part is the 500 section as this dictates the Brinell hardness - this is what stops the bullet piercing the plate! Suitable for all ammunition up to 50 calibre.
If you have ANY QUESTIONS then PLEASE email us at sales@toms-targets.uk before buying. We will be more than happy to answer them!
Hardox® 500 Technical information is available on the manufacturers website SSAB.co.uk